January 18, 2014

Lab 25: IPv6 Static Routing

Configure IPv6 addresses on all routers. Then enable IPv6 unicast-routing and configure a static route on R1 and R2:

ipv6 unicast-routing
ipv6 route 2002:2222::/64 2001:1001::2

As a result, you can ping R2's loopback address from R1:

R1#ping 2002:2222::2

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 2002:2222::2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 12/18/28 ms

# DOWNLOAD LAB 25 GNS3 FILE